Fish and other fat oils are improved in smell and colour, by passing hot air or steam through them. Dunn's method is to heat the oil by steam to 170° or 200°, and force a current of air through it, under a chimney, till it is bleached and purified. Me. Cameron's method of bleaching palm oil is to keep it at 230° with continual agitation by passing into it high-pressure steam, through leaden pipes of two inches diameter. Four tons of oil require 10 hours' steaming. Palm oil is also bleached by chloride of lime. Take from 7 to 14 lbs. of chloride of lime, triturate it in a mortar, adding gradually 12 times the quantity of water, so as to form a smooth cream. Liquefy 112 lbs. of palm oil, remove it from the fire, add the solution of chloride of lime, and stir well with a wooded stirrer. Allow it to cool, and when become solid, break into small fragments, and expose it to the air for 2 or 3 weeks. Then put into a cast-iron boiler lined with lead, and add sulphuric acid in equal weight to the chloride of lime, diluted with 20 parts of water. Boil with a moderate heat till the oil drops clear from the stirrer; then let it cool.

To remove the fetor from fish oils, treat them in the same way (except the exposing to the air), using only 1 lb. chloride of lime to 112 lbs. of oil. It does not remove the natural smell of the oil.

Freshly burnt animal charcoal has some power in improving the colour and smell of most kinds of oil; but its effects are limited.

Calcined magnesia has been used to deprive oils of their rancidity.

Mr. Griseler finds that the addition of a few drops of nitric ether will prevent oils from becoming rancid.

Mr. Watt's patented method of bleaching oil is by chromic acid. For palm oil it is thus used: - The oil is heated in a steam vessel, allowed to settle and cool down to 130° F., then remove into wooden vessels, taking care that no water or sediment accompany it. For a ton of palm oil, make a saturated solution of 25 lbs. of bichromate of potash; add 8 lbs. of sulphuric acid, and 50 lbs. hydrochloric acid (or an equivalent quantity of salt and; sulphuric acid), Put the hydrochloric acid into the oil, and let it be constantly stirred till it becomes of a light-green colour. If not sufficiently decoloured, add more of the mixture. Let the oil settle for half an hour, then pump it into a wooden vat, boil it for a few minutes with fresh water by means of a steam-pipe, and let it settle. For linseed, rape, and mustard oil, a dilute solution of chromic acid is used, with a little hydrochloric acid; for olive, almond, and castor oil, no hydrochloric acid is required. Fish oils and fats are first boiled in a steam apparatus with a weak soda ley (1/2 lb. soda for every ton of fat) for half an hour; then 1/2 lb. sulphuric acid, diluted with 3 lbs. of water, is added; the whole is boiled for 15 minutes, and allowed to settle for an hour or more, when the water and sediment are drawn off, and the oil further bleached by a solution of 4 lbs. of bichromate of potash and 2 lbs. of sulphuric acid properly diluted.

Mr. Davidson treats whale oil first with a solution of tan, next with water and chloride of lime, and lastly with diluted sulphuric acid and warm water. Rape and other seed oils are also refined by means of sulphuric acid and twice as much water. Mr. Gray directs 2 lbs. of oil of vitriol to 112 lbs. of oil. The oil should be carefully washed from the acid, and filtered.

Mr. Bancroft's process for refining common olive oil, lard, oil, etc, for lubricating purposes, is to agitate them with from 3 1/2 to 8 per cent. of caustic soda ley, of 1.2 specific gravity. If on trial a small quantity of the ley be found to settle clear at the bottom, enough has been added. The oil is allowed to rest for 24 hours, for the soapy matter to subside; the supernatant oil is then filtered.

Another plan of purifying oils (especially lamp oils) is to agitate them with a strong solution of common salt.

The above methods of treating oil are of doubtful propriety in reference to such as are to be used as medicines. Oils which have been so carefully prepared from sound and fresh materials as to require no purification should be selected for this purpose. This is especially important in reference to cod-liver oil. See Linseed Oil. Oil for Machinery. Sperm oil, palm oil, and olive oil, are used. Care should be taken that they are not adulterated. For compound lubricants see Anti-attrition, and Lubricating Compounds.