Steps

Tools

Order Of Exercise

1. Planing a cylinder

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. Fitting an axle

2. 5-8 inch bit and bit gauge

2. Plane stock round for roller.

3. Boring

3. Bit stock and 1-8 and 3-16 inch drills

3. Using bit gauge, bore slot in arm.

4. Countersinking

4. Bevel ends of arms.

4. 11/4 inch No. 10 screws

5. Bore all necessary holes.

5. Backsaw and turning saw

6. Screw together, sandpaper and shellac.

6. Try-square and marking gauge

7. Block and Jack plane