Steps

Tools

Order Of Exercise

1. Mortise and tenon joints

1. Pencil, rule, knife, and dividers

1. Square and true stock.

2. 1-2 inch bit and bit stock

2. Cut tenons on braces A and B.

2. Grooving

3. 3- 16 inch drill and bit gauge

3. Cut mortises for tenons in legs.

3. Fitting shelf

4. Stanley Plow No. 45

4. Plow out groove for side slats.

4. Upholstering

5. Cabinet scraper and marking gauge

5. Fit together, glue, and screw in shelf.

6. Try - square, block and Jack plane

6. Sandpaper, stain, and shellac.

7. Upholster.