Half Size.

Model No. 20. - Sponge Rack.

For slats prepare an oblong 25-32" x 4" x 12 1-32" . Proceed with the making of slats as in Model No. 18.

For ends prepare two oblongs 13-32" x 4 1-32" x 4 1-32" . Place them together as one piece. Transfer plan drawing upon opposite sides, and bore holes with auger-bit: cut around lines with turning-saw; cut to lines with smoothing-plane, knife and tile; finish with sand-paper.

For back board prepare an oblong 9-32" x 8 1-16" x 12 1-32". Transfer plan drawing upon one side; bore holes with auger-bit; cut around lines with turning-saw; cut to lines with knife and tile; finish with sand-paper.

Nail together with 1" brads: set nails: level up slats with smoothing-plane; finish with sand-paper.